Is there a medium leakage (water/oil leakage) in the equipment?

Fault phenomenon: Water stains or oil stains appear around the body, the medium liquid level continues to decrease, and there is a risk of fire due to oil temperature machine leakage.

Core reason: Aging of pipeline interface seals (wear of sealing rings and gaskets); Pipeline rupture (long-term vibration or low-temperature freezing cracking); Cracks in the weld seam of the fuel tank/water tank; The valve seal is not tight.

Solution: Immediately stop the machine and close the inlet and outlet valves of the medium; Replace the spare sealing ring due to interface leakage and tighten it by wrapping it with raw material tape; Temporarily seal the pipeline rupture with high-temperature resistant tape, and replace the entire pipeline section later; Minor weld leakage can be temporarily supplemented with medium, and the manufacturer will be contacted for repair later.